cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1151
Views
4
Helpful
2
Replies

ASA 5510 remote management via vpn client

celiocarreto
Level 1
Level 1

Hi,

I need to manage an ASA 5510 by remote using a Cisco vpn client.

I have a 7.2(1) an it's running. I logged into the vpn and ssh I can connect the inside IP of the ASA. I cannot ping the inside IP!

Trying the same scenario on another 5510 with ASA 7.2(4) doesn't work.

Any help?

Regards, Celio

2 Replies 2

JORGE RODRIGUEZ
Level 10
Level 10

Celio,

Does your config have management-access statement anywhere?

in order to manage the ASA via VPN tunnel you need management-access statement.

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/m.html#wp1987122

typical statement

asa(config)#management-access inside

if management0/0 is your only management interface defined by statement under the interface you may need

management-access management

try these and let us know if issues.

Regards

PLS rate any helpful posts

Jorge Rodriguez

Hi Jorge,

I tried different combinations of management-access.

Under 7.2(1) I have no such command and it works!

Under 7.2(4) I configured:

management-access inside

ssh RA-VPN-IP inside

and it works!

Thx for your help.

Celio

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: