02-25-2009 04:41 PM - edited 03-04-2019 03:43 AM
Hello
I have a Fiber link in place and would like to plug in 2 7606 routers on either end on this link.
Does the 7606 have the capability to connect to FX? If not, can I insert a PA with Fiber connectors (like an OC1)?
Thanks
wvw
Solved! Go to Solution.
02-26-2009 02:20 PM
You sure can. You can either use GLC-FE-100FX or GLC-FE-100LX.
Here's the link of supported SFP modules (FastEthernet and GigEthernet) for the 7600 routers:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1270293
Hope this helps you.
02-26-2009 01:40 AM
Yes, you have all types of fiber interfaces on the 7600 routers, including 10 gigabits. What you choose depends by your fiber plant, and budget.
02-26-2009 12:46 PM
We are looking at a fiber link with an LC connector which in turn has to plug into the 7606 router. Any suggestions?
02-26-2009 04:20 PM
We are looking at a fiber link with an LC connector which in turn has to plug into the 7606 router
I think more than LC connector you should provide info what speed you are looking for and what is the distance between 2 routers?
LC is just the connector even if the card for the speed and distance dont have LC connector. you can buy a cable which will convert to LC connector at the end.
02-26-2009 04:25 PM
Please specify fiber type and length of span.
02-26-2009 02:05 AM
-
02-26-2009 02:20 PM
You sure can. You can either use GLC-FE-100FX or GLC-FE-100LX.
Here's the link of supported SFP modules (FastEthernet and GigEthernet) for the 7600 routers:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1270293
Hope this helps you.
02-26-2009 07:19 PM
Thanks for the rating.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide