02-25-2009 06:23 PM - edited 03-04-2019 03:43 AM
Hi Guys,
i wanna check the route memory of my 3GE linecard, when i do show diags command i only see the packet memory tx/rx.
tia.
jeff
02-25-2009 08:03 PM
Hi Jeff,
You must use the show mem on the LC (attach to it first or use exec slot X sh mem command)
HTH
Laurent.
02-25-2009 08:20 PM
Hi Laurent,
I think i found it on the sh diags command, im not certain though. is it the processor memory ?
#sh diags 3 | include Mem
Processor Memory: MEM-GRP/LC-128=
Packet Memory: MEM-PKT-512-UPG=
Processor Memory size: 134217728 bytes
TX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 16384 bytes
RX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 16384 bytes
02-26-2009 06:56 AM
Yes this is the all memory available on your LC.
Processor Memory size is used to store routing information (FIB and adj tables)
TX/RX packet memories are used to forward packets.
You can notice
TX+RX memory size = 512MB
Processor Memory size = 128MB
More information on the following links:
http://www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a00801e1dbe.shtml
Laurent.
02-26-2009 05:06 PM
Hi Laurent,
Thanks for this info, somehow the 3GE LC worked after increasing the RouteMemory. It doesnt work on 128MB, it needs 256MB.
Also does my gsr support the 10GE LC? what is the difference between the Engine 2 and 3 on LC?
Thanks.
jeff
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: