I have to integrate the call manager 4.2.1 with Cisco Catalyst 6509 switch (the Cisco Catalyst 6000 E1 VoIP Gateway)using MGCP
on the catalyst Switch, I have the voice module "WS-X6608-E1" ...
I am trying to search some document on how to do it... I can only find the document on how to configure the call manager on 4.2.1 .... but unable to locate document that can configure the catalyst 6509 voice module for MGCP... any idea where I can find it?
the config is just 1 line
set port voice interface 5/4 dhcp disable 192.168.100.214 255.255.255.0 vlan 100 tftp 192.168.4.40 gateway 192.168.100.1 dns 22.214.171.124
If using DHCP
#set port voice interface mod/port dhcp enable
# set port voice interface mod/port dhcp disable ip address subnet mask vlan <#> tftp ip address gateway ip address [dns ip address]
if this helps, please rate