Single Number Reach CUCM 7.0

Unanswered Question
Feb 26th, 2009
User Badges:
  • Silver, 250 points or more

Installing CUCM v 7.0 and was testing Single Number Reach. Now I have the settings configured but as i was reading the Admin guide I realized that 7940/60 are not supported with SNR. Is this correct?


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fsmobmgr.html#wp1127918

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
testeven Thu, 02/26/2009 - 15:38
User Badges:
  • Cisco Employee,

Hi!


Those phones are supported. Please refer to the SRND:


"Mobile Voice Access and Enterprise Feature Access are supported for all incoming PSTN devices capable of

sending DTMF digits. Cisco Unified IP Phone support for these features is the same as for Mobile Connect

(see Mobile Connect Phone Support)."


Mobile Connect Phone Support


https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/mobilapp.html


Hope this helps!


Regards,


Teresa.

mattcalderon Thu, 02/26/2009 - 18:26
User Badges:
  • Silver, 250 points or more

I have read through the link that you have supplied, and it does seem to mention the 7960/40 as applicable phone types but what about the mention in the CUCM admin guide? It does not specify that phone type.


FYI..I did get it working.

Actions

This Discussion