02-26-2009 09:04 PM - edited 03-06-2019 04:17 AM
To whom it may concern,
For CatOS, what's the command to change a port from trunk port to access port on VLAN 50??
On Native IOS:
switchport access vlan 50
switchport mode access
But what's the command on CatOS??
Cheers,
Hunt
02-26-2009 10:05 PM
set vlan 50 0/15
Here i have assumed 0/15 is your port number.
02-26-2009 11:54 PM
i did do that.... but when i connect a laptop to 0/15, it still show up as trunk on 'show port'.
02-27-2009 01:01 AM
Hi Hunt,
You can use
set port host
which will set your port to access mode and perform portfast. After doing this , you can assign the correct vlan to your port.
Hope to help,
Kerem
02-27-2009 05:15 AM
You can also use set trunk slot/port off " I believe. This makes it a access port.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
