02-26-2009 11:21 PM - edited 03-15-2019 04:30 PM
Hi,
My outgoing calls takes about 20sec to get thru. May I know where the problem lies on?
02-27-2009 05:20 AM
You can check 'show voice dsp detail | i default'. If that spits an error message you have a file in flash changing your DSPware.
-nick
02-27-2009 09:52 AM
Be sure if there some overlap in your dial plan scheme!
Check here (Assumes that you're using Cisco CallManager in your scenario...) for more information:
Cisco Unified Communications SRND Based on Cisco Unified Communications Manager 5.x - Dial Plan [Cisco Unified Communications Manager (CallManager)] - Cisco Systems:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/5x/50dialpl_ps556_TSD_Products_Implementation_Design_Guide_Chapter.html#wp1043339%27)%22%3Ehttp://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/5x/50dialpl_ps556_TSD_Products_Implementation_Design_Guide_Chapter.html#wp1043339
HTH,
Vitor
03-01-2009 06:24 PM
Sorry for the lack of details....
I'm using UCM 6.1 connected via FXO
currently got only 2 ip phones DN 777 and 888
My dial pattern is 6.@ and 9.@
Is there any problem with my setup that cause the delay in dailing out?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: