Query about Tech-Prefix in GK and VG????????

Unanswered Question
Feb 27th, 2009
User Badges:

I have a question about tech-prefix in GW as followed,


1)Local zone GK, domain: cisco.com

That's only command in gatekeeper.

2)Tech prefix: 1 for ccm, 852 for CME.

I don't known how to defind tech-prefix in VG, i'm not sure whether the beloing configure is fine.


int lo 1

ip add


zone local GK cisco.com

no sh

-----GW (CME)----

int lo0

ip add

h323-gateway voip bind srcaddr

h323-gateway voip h323-id CME

h323-gateway voip id GK ipaddr

h323-gateway voip interface

h323-gateway voip tech-prefix 852 ????????not sure????????

dial-peer voice 1 voip

destination-pattern 900.T

sesstion targe ras

tech-prefix 1 ????????not sure????????

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
pradeepde Thu, 03/05/2009 - 07:04
User Badges:
  • Bronze, 100 points or more

To configure a technology prefix in the gatekeeper, use the gw-type-prefix command.

To define the technology prefix that the gateway will register with the gatekeeper, use the h323-gateway voip tech-prefix interface configuration command.

h323-gateway voip tech-prefix prefix

To specify a particular technology prefix be prepended to the destination pattern of a specific dial peer, use the tech-prefix dial peer configuration command.

tech-prefix number


This Discussion