02-27-2009 08:00 AM - edited 03-04-2019 03:44 AM
Guys
we have an application that needs to be on a specific IP and subnet. we have all local clients working, however, the customer wants to have remote branches connect to the system. the vendor has advised that the remote clients must be on the same subnet for this to work.
how can i acheive this using the Wide area network?
would bridging be applicable for this?
thanks in advance for all the responses.
02-27-2009 08:04 AM
Arvind
There are a number of approaches but the "cleanest" way in my opinion is to use L2TPv3 which allows you to extend a L2 vlan across L3 routed links -
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html
Jon
02-27-2009 08:28 AM
Guys
thanks a lot
02-27-2009 08:05 AM
L2TPv3 if your routers support it.
HTH,
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: