I have an issue that I cannot work out.
I had all my policing statements working, when I had my asa's plugged into an old 6509 via a fiber port that was trunked on both ends and the ports that the asa's were plugged into were normal switch ports.
I have now plugged them directly into the new 6509 and now I am only getting policing on downloads only.
police cir 8388500 bc 265625 be 265625 conform-action transmit exceed-action drop violate-action drop
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
mls qos vlan-based
ip address 10.1.16.2 255.255.255.0
ip access-group Productions in
ip helper-address 10.1.6.10
no ip redirects
no ip unreachables
ip flow ingress
ip route-cache flow
no ip mroute-cache
mls netflow sampling
standby 15 ip 10.1.16.1
standby 15 priority 250
standby 15 preempt
service-policy input 8_Mb_Internet
service-policy output 8_Mb_Internet
Any ideas what could be causing the qos to police only downloads and not up loads ?