Route Traffic based on source to different NATs

Unanswered Question
Feb 27th, 2009
User Badges:

Is it possible to route NAT traffic to different Servers on the internal Netowrk based on the source IP on the external(internet) side.


I want to route traffic from different source countrys IPs (which I hace the ACL for) to different internal Web servers.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
adamclarkuk_2 Fri, 02/27/2009 - 13:02
User Badges:
  • Silver, 250 points or more

Hi Jim


Policy routing or policy nat should help you do this. You will be able to do destination NAT based on the source address by attaching a route-map to your nat statement.

Or you could you the policy routing to set the next hop based on source address if the servers live in different subnets.


Or a combination of the 2.


Here is a link for policy routing

hxxp://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml


Let me know if you need any more help.

Actions

This Discussion