02-27-2009 01:20 PM - edited 03-04-2019 03:45 AM
I have run PRB on multiple Cisco router 2800, 3800, 6500 etc. We use it for redircting to a WAN Accelerator. We setup the ASR the same as all our other with a route-map and an match criteria of an ACL and added the "ip policy route-map" statement to the LAN side interface, no traffic is hitting the ACL, upgraded to the latest software on the ASR 12.2(33)XNB2. I ahve also tried using WCCP with similar ACL's will not work either. Has anyone come across this issue?
Thanks Tom
Solved! Go to Solution.
02-27-2009 07:47 PM
Hi,
ACL counting when used for PBR is not supported on the ASR. But the PBR feature is working and supported starting XNB
HTH
Laurent.
02-27-2009 07:47 PM
Hi,
ACL counting when used for PBR is not supported on the ASR. But the PBR feature is working and supported starting XNB
HTH
Laurent.
03-02-2009 05:00 AM
Thanks for the answer!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: