cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
541
Views
0
Helpful
7
Replies

Extension Mobility - UC520

g.portellas
Level 1
Level 1

Hi All,

We installed our system in November of last year - so far all good, however I want to now enable extension mobility to allow users to switch between desks as well as add remote access for our sales guys. I have not been able to find any sample configuration guides and was hoping someone could share or point me in the right direction.

Thanks

Gary

7 Replies 7

Hi Gary,

Kindly find the 2-links below

this is an example on how to configure extension mobility:

www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f8b2f.shtml

It is from adding the service to the step of subscribing the phone

Wish this be helpful

Hi Gary,

Sorry for missing the other link

it is for the troubleshooting purposes for ext mobility

www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080093e72.shtml

Wish this be helpful

paolo bevilacqua
Hall of Fame
Hall of Fame

The guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html

recommend you also update IOS to minimize the chance of running into bugs.

sanjayist
Level 1
Level 1

Hi Gary,

Create device profiles for each user and then associate their phones with that.All subscribe all the phones to extension mobility servcies so that phone can show EM options

hythamhadad, sanjayist

What you're missing here, is that the OP does NOT have CCM, he has CME (UC520).

Correct, this is a UC520 system.

Cisco UC520-48U-T/E/F-K9 (MPC8358) processor (revision 0x202) with 249856K/12288K bytes of memory.

Processor board ID FTX1234Y01U

MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20

56 User Licenses

10 FastEthernet interfaces

24 Serial interfaces

2 terminal lines

1 Channelized T1/PRI port

4 Voice FXO interfaces

4 Voice FXS interfaces

1 Voice MoH interface

1 cisco service engine(s)

128K bytes of non-volatile configuration memory.

125440K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Here again my answer as above:

The guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html

recommend you also update IOS to minimize the chance of running into bugs.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: