wireless client disconnect from lightweight. on aotunomous work fine

Unanswered Question
Mar 2nd, 2009
User Badges:

I have a network with 5 access points ligthweigth and WLC 4402,

in the network I have disconnect from the users that they are

associated in the aps, this disconnects are so frequent.

all the possible sources of interference are contained by the wlc. I made a test but using an autonomous ap, my wireless network works fine and the users don't disconnect any more.

Any ideas

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Leo Laohoo Mon, 03/02/2009 - 13:41
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

I understand that the clients get associated to the AP's, but do they get Authenticated?

dennischolmes Mon, 03/02/2009 - 20:00
User Badges:
  • Gold, 750 points or more

Could be several things but here is the most likely. Set your client user timeout from 300 to like 28800. This lengthens the time the controller keeps a session from a device that may go to sleep mode and have no wireless traffic.

sdeltoro1 Mon, 03/02/2009 - 20:14
User Badges:

yes the client is authenticated. but is disconnect frecuntly.

let me made the test on changeing the user timeout.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode