1310 WBG

Unanswered Question
Mar 2nd, 2009
User Badges:

I have a 1310 WBG that is connected to the infrastrure pointed at a 1240 AP. The problem that I am seeing is a client (camera) works once the camera is powered up. It gets an IP and then it is unaccessible from the network. I can login to the bridge and ping the device. What could be causing the device not to be accessible from the network?


Thanks,


TJ

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Mon, 03/02/2009 - 17:32
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

What's the make and model of the camera?

Leo Laohoo Mon, 03/02/2009 - 19:03
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Does your camera tell you which AP you're currently assocated to? Can your camera also tell you if you're authenticated?

TJ Kelly Tue, 03/03/2009 - 07:45
User Badges:

The only thing I can do is ping the camera from the bridge. I cannot ping the camera from the other side of the bridge. The bridge is associated with the correct AP and I can login into the bridge.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode