ANI based call routing

Unanswered Question
Mar 2nd, 2009
User Badges:

We have unique requirement like this.


Phone A Phone B---CM6--3845GW---PSTN-- Phone 1 Phone 2


calls from phone 1 should go to the Phone A, Phone 2 should go to the phone B. (Based on ANI)


Is this possible?


Thnks,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nicholas Matthews Mon, 03/02/2009 - 19:20
User Badges:
  • Red, 2250 points or more

If you're using H323 or SIP on your GW then you can do this.


You need to make sure you're not using an 'incoming called-number' command on any of your pots dial peers, and do something like this:


dial-peer voice 1 pots

direct-inward-dial

translation-profile incoming 1

answer-address 5551234

port 0/0/0:23


dial-peer voice 2 pots

direct-inward-dial

translation-profile incoming 2

answer-address 6661234

port 0/0/0:23



Then in your translation profile you would have two different called numbers.


voice translation-profile 1

translate called 1


voice translation-rule 1

rule 1 /.*/ /1234/



voice translation-profile 2

translate called 2


voice translation-rule 2

rule 1 /.*/ /5555/


That was the ANI in dial peer 1 will call the number in rule 1, and so on.



-nick

pgamage Tue, 03/03/2009 - 21:15
User Badges:

HI, I am sorry i have forgotten to mention important thing here. This is a CM + CRS installation. so need to do with scripts. any way I would try your method and It will be helpful.

Actions

This Discussion