03-03-2009 01:05 PM
I have setup for a customer a WRV200 and they have one subtenant that needs to connect to her corporate office via Cisco VPN, but the router is not allowing her to do so and gives a connection error both the primary connection and secondary. I have even opened port triggering to see if that helps and no go. Please let me know why it's not doing the VPN Pass-through. Thanks
P.S. Will be providing screen shot of error once I receive it.
03-03-2009 02:39 PM
03-06-2009 11:08 PM
Hi Scott,
As a first step, verify you have the latest release of code on the WRV200, Firmware version 1.0.39 ?
You can check this by viewing the top right side of the management GUI within the WRV200.
Dumb question maybe, but have you also enabled IPSec passthru on the router.
Has she 'enabled transparent tunneling' on her client
If your answer is yes, you better have a chat to the folks the Small business TAC (S-TAC). Contact Link to this new Small business support center is below.
http://www.cisco.com/en/US/partner/support/tsd_cisco_small_business_support_center_contacts.html#csb
http://www.cisco.com/en/US/partner/support/tsd_cisco_small_business_support_center_contacts.html#csbhttp://www.cisco.com/en/US/partner/support/tsd_cisco_small_business_support_center_contacts.html#csb
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide