Simple FXS port no access digit dialing (for Fax and EFTPOS)

Unanswered Question
Mar 3rd, 2009
User Badges:

There may be several ways to do this, but with some assistance for the big C guys (cheers Luke and Dave) here is a simple solution for no access digit dialing for FXS ports. (that is, can dial the number directly without using 0 or 9 to select 'outside line')



Because the FXS port is a skinny controlled port, we apply a translation profile to the ephone-dn for the port to add the access digit (in our case 0)


So, create the translation rule and profile


EXAMPLE:


conf t


voice translation-rule 10001

rule 1 // /0/


voice translaton-profile FXS_FAX_EFTPOS

translate called 10001


end



  Then, on ephone-dn 5 (if that is the port you are using, ephone-dn5 is 0/0/0 of the fxs for this example)


add the translation profile to the port


conf t

telephony-service

ephone-dn 5

translation-profile incoming FXS_FAX_EFTPOS

end


So now when dialing out on this port, the leading 0 for outside number does not need to be added. However you cannot dial internally from this port. (generally not an issue on a fax or eftpos terminal)



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion