Configuring policy-map in 4503 switch

Unanswered Question
Mar 4th, 2009

Hi, we trying to configure policy-map in 4503 switch and by applying through police we are experiencing packet drop.


config detail:

class-map match-any voice

description voice

match access-group 101

!

!

policy-map priortization

class voice

police 768000 bps 1000 byte conform-action transmit exceed-action drop

class class-default

police 7000000 bps 1000 byte conform-action transmit exceed-action drop



Please let us know what is the best method of configuring the same


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Wed, 03/04/2009 - 22:55

Which class are you seeing the drops?


Chnage your policy map to something like this

policy-map priortization

class voice

priority 768

class class-default

police 7000000 bps 1000 byte conform-action transmit exceed-action drop


The priority command will enable the class for priority queueing and will have an implicit policer as well.


Narayan


gopinathv Wed, 03/04/2009 - 23:00

hi, in this switch i can see only few option in policy-map


cat01(config-pmap-c)#?

QoS policy-map class configuration commands:


no Negate or set default values of a command


police Police traffic matching current class


set Set QoS values


dbl Dynamic buffer limiting


exit Exit from QoS class action configuration mode


trust Set trust value for the class


i dont see the priority or bandwidth option in this Version 12.2(20)EW4 switch.


thanks


Actions

This Discussion