03-04-2009 11:53 PM
Hi,
In Commom Services homepage, Under Security the Authentication mode TACACS is in redcolour. Can you please tell me why the TACACS is in RED colour. Is it coz of any problem? I have attached the screen shot also. Please have a look and provide the solution.
03-05-2009 12:02 AM
This indicates that there was a problem contacting the TACACS+ server on tcp/49 from the LMS server. When you login to LMS now, you will be using the local LMS authentication database instead of the TACACS+ server.
If you have confirmed that the TACACS+ server is up, and properly servicing AAA requests, have a look at this thread:
03-05-2009 03:37 AM
Hi,
I have restarted the Daemon manager. But then also problem with TACACS is still persists. please suggest
03-05-2009 10:13 AM
Then there must be a communication problem. Double-check your TACACS+ module configuration under Common Services > Server > Security > AAA Mode Setup. Make sure the TACACS+ secret key is correct with what your server has configured, and again, make sure tcp/49 is reachable from the LMS server to the TACACS+ server.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide