wlc and ssid

Answered Question
Mar 5th, 2009

hi, all!

i try to find an answer if wlc can advertise not all ssid to the lap's. how can i setup this feature?

for example - i have 10 LAPs over the building and 5 SSID's.

i need to advertise only 3 SSID at the 1 floor and all of them at the second floor.

is it possible?

ps sorry for my bad english ))

I have this problem too.
0 votes
Correct Answer by jigsaw2026 about 7 years 9 months ago

Hi Vadik,

Yes it's possible - in version 4 you would use WLAN override. Basically in the radio config of each AP you can select WLAN override, and then check the WLANs that you want to advertise.

In version 5 you would use AP groups.

I've found this quite helpful:

http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40wlan.html#wp1114777

J

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode