OSPF command query

Unanswered Question
Mar 5th, 2009
User Badges:

I read from the book that


"sh ip ospf [process id] database network" display the network link-state information.


Any idea how to read and why we need to issue this command instead of the normal "show ip ospf interface" or "show ip ospf database"? Thanks



OSPF Router with ID (1.1.1.1) (Process ID 100)


Net Link States (Area 0)


Routing Bit Set on this LSA

Now in buffer table

Table index: 55 min 24 sec

LS age: 1573

Options: (No TOS-capability, DC)

LS Type: Network Links

Link State ID: 10.152.130.19 (address of Designated Router)

Advertising Router: 1.1.1.1

LS Seq Number: 800022DA

Checksum: 0x3372

Length: 32

Network Mask: /29

Attached Router: 1.1.1.1

Attached Router: 2.2.2.2



Secondly, any idea why are the ip of Attached router not connected to the router itself? What is the actual meaning of that?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Thu, 03/05/2009 - 01:10
User Badges:
  • Green, 3000 points or more

The sh ip ospf database command displays sumamry of all the LSA types on the router


sh ip ospf database network will give you detail information of the network LSA.


2. Network LSAs are sent by the DR in a multiaccess network like ethernet. the attached router indicates the router IDs of the ospf neighbors on that segment


http://www.cisco.com/en/US/docs/ios/12_0/np1/command/reference/1rospf.html#wp1019107


Narayan

Actions

This Discussion