I'm facing a strange issue with SIP provider registration.
Here is my sip config on the gw:
credentials username vgtestsimac password XXXXXX realm voipGATE
authentication username vgtestsimac password XXXXXX realm voipGATE
retry invite 3
retry response 3
retry bye 3
retry cancel 3
retry register 10
timers trying 1000
timers connect 100
timers connection aging 30
timers hold 120
timers register 1000
mwi-server dns:register.voipgate.com expires 3600 port 5060 transport udp unsolicited
registrar dns:register.voipgate.com expires 3600
offer call-hold conn-addr
permit hostname dns:register.voipgate.com
And I just want to know why the command "sh sip-ua register status" show that:
Voice_Gateway#sh sip-ua register status
Line peer expires(sec) registered
================================ ========== ============ ==========
0.* 300 0 no
vgtestsimac -1 2603 yes
What is the line "0.*" and from where it come ?
It always send register packet to the SP and dunno how to remove it.
Anybody know ?
Check your pots dial peers, one of them probably has that as a destination-pattern.
You would want to configure something like this:
dial-peer voice 1 pots
(Which by the way, should probably be 0T)