Problems with h323 trunk CME CUCM BE

Unanswered Question
Mar 5th, 2009
User Badges:

Hi all,

I am configuring a trunk h323 between a CME 7,0 and a CUCM BE 6.1. The calls from the CUCM to the CME work's fine, but the calls from the CME that is turned aside to the voice mail, fails, the phone show the following error "number unknown".

The configuration of gateway h323 in the CUCM is configured a CCS that it has the partition of the numbers of the voice mail.

I have attached dial-peer config below.


dial-peer voice 1000 voip

destination-pattern 1...

session target ipv4:

dtmf-relay h245-alphanumeric

codec g729br8


Any idea why so?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Marwan ALshawi Thu, 03/05/2009 - 05:09
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

this is when you dial the number or u press the message button ?

can you call any other number in CUCM?


This Discussion