03-05-2009 03:06 AM
Hi,
We are having trouble archiving our SAN switch config.
We are using LMS 3.0, is there something I need to change in the configuration?
Solved! Go to Solution.
03-09-2009 09:13 AM
This device is supported in RME 4.1.1 with MDS package version 5.1. Make sure you have the MDS package properly loaded under Common Services > Software Center > Device Update.
03-05-2009 10:11 AM
What trouble are you seeing exactly? What errors do you see when trying to run a Sync Archive job against these devices?
03-06-2009 01:40 AM
Hi thanks for your response.
The error message I am getting is:-
CM0056 Config fetch failed for llswl1san1.internal.uwic.ac.uk Cause: CM0204 Could not create DeviceContext for 1230 Cause: CM0206 Could not get the config transport implementation for 192.168.199.21 Cause: UNKNOWN Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed.
Jamie
03-06-2009 08:34 AM
This points to a missing device package within RME. What version of RME do you have? What is the sysObjectID of this MDS?
03-09-2009 01:23 AM
Thanks for your help with this.
The version of RME is 4.1.1 the ObjectID is .1.3.6.1.4.1.9.12.3.1.3.587
Jamie
03-09-2009 09:13 AM
This device is supported in RME 4.1.1 with MDS package version 5.1. Make sure you have the MDS package properly loaded under Common Services > Software Center > Device Update.
03-12-2009 01:44 AM
That worked, thank you ever so much.
Jamie
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide