03-05-2009 05:08 PM - edited 03-04-2019 03:49 AM
Hello:
Kind of in a jam right now and need aquick tutorial on how to limit outbound traffic on a Multimeg frame relay circuit to 1 mb.
Would do some research on my own but I need to get this in place asap. Any help would be appreciated.
Thanks
Solved! Go to Solution.
03-05-2009 05:13 PM
map-class frame-relay 1Mbps
frame-relay cir 1000000
interface sx/x
frame traffic-shaping
frame interface-dlci xxx
class 1Mbps
HTH,
__
Edison.
View solution in original post
03-05-2009 05:29 PM
Worked like a charm. Thanks so much
03-05-2009 05:33 PM
Spoke to soon. this worked bu limits traffic in and out. I just need to limit outbound. Is that possible
03-05-2009 06:22 PM
policy-map 1Mbps
class class-default
police cir 1000000
service-policy output 1Mbps
Leave the shaping and class under the interface as it was before.
03-05-2009 06:47 PM
Thanks so much for your help. I really appreciate it!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
