Redundant SUP Engine V fails to synchronize

rgsuello84 · ‎03-06-2009

Hello Everyone,

I'm trying to configure an interface on the switch but the terminal/telnet stalls for a few moments and shows the following message:

11w2d: %HA_CONFIG_SYNC-3-LBL_CFGSYNC: Unable to sync due to IPC timeout or IPC rsp loss with current timeout(150) in second

11w2d: %HA_CONFIG_SYNC-3-LBL_CFGSYNC: Unable to sync cfg-changed cmd(int GigabitEthernet3/1) to standby

11w2d: %SYS-5-CONFIG_I: Configured from console by administrator on console

Need help on this. I can't configure anything on the switch, especially on the interface level.

Please anyone, badly need your help.

Thanks,

Ralph

miketennyson · ‎03-06-2009

What OS version are you running? In the short term, have you tried simply removing the redundant sup so that you can make changes?

rgsuello84 · ‎03-06-2009

here is my OS:

Version 12.2(40)SG, RELEASE SOFTWARE (fc2)

About removing the redundant SUP, i don't want to try it out first until I am able to use all other means to make the synch work. Is this some kind of a bug or something?

Leo Laohoo · ‎03-06-2009

Have you tried using a different IOS?

rgsuello84 · ‎03-06-2009

nope, not yet.. That may be our first step on the troubleshooting. I will give you feedback after i have done this.