Outgoing numbers -DDI's

Unanswered Question
Mar 6th, 2009

Hi. I've installed a 2801 CCME system for one of my customers.

They have a bunch of DDI numbers. That works great, until someone has a missed call from them. The person with the missed call returns the call, and the head office 'main' system number shows.

Im using voice translation rules:

voice translation-rule 1

rule 1 /433599/ /201/

rule 2 /433585/ /301/

rule 3 /487153/ /201/

rule 4 /43358./ /201/

rule 5 /43359./ /201/

!

voice translation-rule 2

rule 1 // /90/

!

voice translation-rule 3

rule 1 /210/ /487153/

So basically what im trying to achieve is that if I call a number from a particular DN, I want to 'leave' my associated DDI number on the handset ive called.

Any pointers?

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Marwan ALshawi Fri, 03/06/2009 - 06:58

try the following

voice translation-rule 1

rule 1 /^\(....\)/ /043359\1/

voice translation-profile p1

translate calling 1

dial-peer voice 1 pots

destination pattrent 0.T

translation-profile p1 outgoing

port [portnumber]

this is just example

this trnaslation add the PSTN number to the las four DID number you have

u need to make sur eu put the right number otherwise the telco if recieve the wrong one will send the main number only

good luck

if helpful Rate

Actions

This Discussion