SCE 2020:inline-cascade

Unanswered Question
Mar 6th, 2009
User Badges:

Getting the below error message when I apply the following command under interface LineCard 0 'connection-mode inline-cascade physically-connected-links priority primary on-failure bypass'


### command ###


SCE2020-3(config if)#connection-mode inline-cascade physically-connected-links priority primary on-failure bypass



### Error message ###


Error - connection mode configuration can only be changed when Line Card is in '

no-application' or 'shutdown' mode.


### Interface LineCard0 ###


SCE2020-3#show interface LineCard 0


The application assigned to slot 0 is /tffs0/_release.sli

Silent is off

Configured shutdown is off

Shutdown due to sm-connection-failure is off

Resulting current shutdown state is off

WAP handling is disabled

SCE2020-3#

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion