Removal of corrupt group policy

djpeacocke · ‎03-06-2009

I have a group policy that I use for SSL VPN for some of my users. It has some machine characters after the group name. I have tried unsuccessfully to remove the group policy, but keep getting a "group XXXX does not exist" error. I have tried from the ASA and from the command line.

I attached a screen shot of the corrupt pool.

Thoughts and/or suggestions would be welcome

Ivan Martinon · ‎03-06-2009

How are you trying to remove that line? Have you tried using ASDM to see if it shows that part of the config?

djpeacocke · ‎03-06-2009

Tried both from the ASDM and a copy and past from the CLI. FWIW, the garbage at the end of the line appears different in ASDM than it does in the CLI.

Ivan Martinon · ‎03-06-2009

Go ahead and do a "show run all group-policy" wait till you get the output of that specific group policy, then see if you can just copy paste that name without the trash and issue a "clear config group-policy XXXXXXXXXX"

djpeacocke · ‎03-06-2009

Thanks I will let you know what happens.

djpeacocke · ‎03-16-2009

Well I tried that and I received the following error:

ERROR: group-policy XXXX does not exist

Next idea?

David