ADSL config on Ethernet interface

Answered Question
Mar 7th, 2009

Hi all

Our service provider is giving ADSL connection on Ethernet(RJ45(HWIC-1FE))interface on router side.Is the configuration on the router is same like ADSL ports(RJ11-ATM0/1/0)?.Please advise?

I have this problem too.
0 votes
Correct Answer by Giuseppe Larosa about 7 years 9 months ago

Hello Anvar,

the configuration can be similar if using PPPoE:

the ethernet interface is configured to use the pppoe client feature that can use a dialer interface.

see

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080126dc0.shtml#configs

Note:

newer IOS images don't need to use the vpdn to be able to perform PPPoE client.

see for example for 12.4

http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_client_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1053456

Hope to help

Giuseppe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Giuseppe Larosa Sat, 03/07/2009 - 23:13

Hello Anvar,

the configuration can be similar if using PPPoE:

the ethernet interface is configured to use the pppoe client feature that can use a dialer interface.

see

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080126dc0.shtml#configs

Note:

newer IOS images don't need to use the vpdn to be able to perform PPPoE client.

see for example for 12.4

http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_client_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1053456

Hope to help

Giuseppe

Actions

This Discussion