3560 POE issues

Answered Question
Mar 8th, 2009
User Badges:

Hi Guys


i have a 3560 running IOS 'c3560-ipservices-mz.122-25.SEB4.bin'


When i connect a cicso ip phone into the port it goes into err-disable. when i do a show power inline f0/19 it says inline power is not supported on this interface. This is the case for all interfaces...


The power available is showing as zero.. why is this?


I checked the feature navigator and it seems as though this hardware and IOS should support poe, anyone got any ideas??


Switch#sho power inline

Available:0.0(w) Used:0.0(w) Remaining:0.0(w)


Interface Admin Oper Power Device Class Max

(Watts)

--------- ------ ---------- ------- ------------------- ----- ----

Switch#

Switch#sho power inline f0/19

Interface Fa0/19: inline power not supported


Thanks

Correct Answer by adamclarkuk_2 about 8 years 2 months ago

The 3560 does support POE but not every model.


What is the model of your 3560


Below is a link to the 3560's with and without POE support :-

hxxp://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
andretimoll Sun, 03/08/2009 - 10:47
User Badges:

WS-C3560-24TS-E


Looking at the data sheet it does not support poe.


Thanks for clearing this up.

Actions

This Discussion