Static Route

Unanswered Question
Mar 8th, 2009

Hi ALL:

I have 2 links primary is MPLS if MPLS goes down IPSEC is established using other link

Whats happenning is 1 of the static route enrty is showing when the IPSEC is down and when i am trying to remove it it giving error.

I am using 7206xm.

MPLSR1#sh ip route static | i 10.20.28.0

S 10.20.28.0/24 [1/0] via 10.252.19.23

MPLSR1#sh crypto isakmp sa | i 10.252.19.23

MPLSR1#sh ip route 10.20.28.1

Routing entry for 10.20.28.0/24

Known via "static", distance 1, metric 0

Redistributing via eigrp 100

Advertised by eigrp 100 metric 10000 100 255 1 1500

Routing Descriptor Blocks:

* 10.252.19.23

Route metric is 0, traffic share count is 1

HBBCPMPLSR1#sh ip route static | i 10.20.28.0

S 10.20.28.0/24 [1/0] via 10.252.19.23

HBBCPMPLSR1(config)#no ip route 10.20.28.0 255.255.255.0 10.252.19.23

%No matching route to delete

Chao

Vishwa

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Yasir Ashfaque Sun, 03/08/2009 - 11:55

on HBB type "show run | i ip route"

and see what exact command have you added and then do no to that.. or try to reload

vishwancc Sun, 03/08/2009 - 22:03

Hi ,

Sorry my bad its all the output are from MPLSR1 ,please ignore HBB at front.

Chao

Vishwa

Actions

This Discussion