Snmp problem communicating with HPOV Mgmt Server

Unanswered Question
Mar 8th, 2009
User Badges:

Hi Expert,

I have a problem when connecting to snmp mgmt server which all the parameters already in. The sh snmp shown below:

Need assistance on this. Thanks.

STCRR##sh snmp

Chassis: JABefe1LA

Contact: GG

Location: CRR

13704508 SNMP packets input

0 Bad SNMP version errors

353 Unknown community name

0 Illegal operation for community name supplied

66 Encoding errors

85347883 Number of requested variables

101 Number of altered variables

9684150 Get-request PDUs

4005295 Get-next PDUs

23 Set-request PDUs

15971374 SNMP packets output

54 Too big errors (Maximum packet size 1500)

327015 No such name errors

0 Bad values errors

0 General errors

13704089 Response PDUs

2267285 Trap PDUs

SNMP logging: enabled

Logging to, 0/10, 6796 sent, 0 dropped.

Logging to, 0/10, 6796 sent, 0 dropped.

Logging to, 0/10, 6796 sent, 0 dropped.




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Pravin Phadte Fri, 03/13/2009 - 00:58
User Badges:
  • Silver, 250 points or more


If you are trying to connect to the mangement server. NMS on remote or local end ???

You do not need to configure the snmp...

Check the access to the server.

If the snmp server is not able to poll the agent then you need to check the snmp settings.


This Discussion