Callmanager Express 4.1

Unanswered Question
Mar 9th, 2009

Dear All,

I have CallManager Express 4.1, I want to configure one of my extensions (701) to automatically forward the calls to another extension (705) after 2 rings only if no body there to pick the handset of 701

How to do this?


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rob.huffman Mon, 03/09/2009 - 07:08

Hi Majai,

call-forward noan

To configure call forwarding so that incoming calls to an extension (ephone-dn) that does not answer are forwarded to another number, use the call-forward noan command in ephone-dn or ephone-dn-template configuration mode. To disable call forwarding, use the no form of this command.

call-forward noan target-number timeout seconds

timeout seconds - Sets the duration that a call can ring with no answer before the call is forwarded to the target number. Range is from 3 to 60000. There is no default value.

From this good CME doc;

Hope this helps!


tonyspcrepairs Tue, 03/10/2009 - 05:43

I am only a beginner but in your config try this:

#ephone-dn 701

call-forward noan 705 timeout 4

you might need to save the running-config and reboot the router to bring in the change.

Adrian Saavedra Tue, 03/10/2009 - 07:02

Hi Anthony,

Rebooting the router is not necessary for changes to take effect.

Best regards,

- Adrián.


This Discussion