802.11n

Unanswered Question
Mar 10th, 2009

Hi,

can I deploy 802.11n on AP 1242AG ?

If so, what's command have to I entry ?

Best regard

Lorenzo

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rob.huffman Tue, 03/10/2009 - 05:40

Hi Lorenzo,

The 1242 AP does not support 802.11n :( There are currently two Cisco models that support support the IEEE 802.11n draft 2.0 standard. They are shown below;

Cisco Aironet 1140 Series wireless AP:

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html

And

Cisco Aironet 1250 Series AP:

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/ps8382/product_data_sheet0900aecd806b7c5c.html

Hope this helps!

Rob

Leo Laohoo Tue, 03/10/2009 - 14:43

1250 can be Autonomous or LWAP mode but the 1140 is LWAP only mode. No idea when Cisco will release the Autonomous IOS.

If you are not using a WLC, the 1250 will need 18.5 watts of power while the 1140 can be powered using standard 15.4 watts.

Leo Laohoo Mon, 03/16/2009 - 21:17

1140 Autonomous IOS "targeting a beta in May with code release in June/July time frame" 2009.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode