03-10-2009 04:09 AM - edited 03-06-2019 04:30 AM
Hi
Switch stuck in ROMMON Prompt and giving following error.
Could not find a valid file in BOOT environment variable.
BOOT variable can be set from IOS. To find currently set
Rom Monitor variables, please type 'set' command.
Switch running with IOS cat4000-i5k91s-mz.122-25.EWA10
Regards
03-10-2009 04:57 AM
Hi
Have you tried the recovery procedure yet.
hxxp://www.cisco.com/en/US/products/hw/routers/ps5199/products_tech_note09186a0080094012.shtml
03-10-2009 02:03 PM
Try "dir flash:" and look for the IOS file. When you find it, try the following commands: boot flash:filename
03-11-2009 03:55 AM
Hi
I have tried all these options not working.
Guys!!!!
I tried putting Compact flash with a valid IOS in it and when I issue command dir slot0: , it is giving error
device does not contain a valid magic number
dir: cannot open device "slot0:"
Any idea about this , Appreciate quick response.
03-11-2009 04:27 AM
It sounds like the the file is corrupt.
Try another flash card, or booting from TFTP. You can also copy another image via xmodem.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: