03-10-2009 08:22 AM - edited 03-15-2019 04:44 PM
Hi,
I am planning an upgrade from CUCM 6.0.1.2000-3 to 6.1.3.2000-1, and nowhere is the upgrade path from 6.0 listed in the release notes.
Do I need to upgrade to 6.1.2 first, then move to 6.1.3?
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613a.html#wp396072
Thanks,
Jeff
Solved! Go to Solution.
03-10-2009 08:28 AM
Hi Jeff,
This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074
Hope this helps!
Rob
03-10-2009 08:28 AM
Hi Jeff,
This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074
Hope this helps!
Rob
03-10-2009 08:32 AM
Thanks Rob.
At least it's a quick process :)
03-10-2009 11:22 AM
Hey Jeff,
You are most welcome my friend! Not like the "old" days, I remember a 30 hour ordeal going from CCM 3.2 to 3.3 UGHHH!!
Cheers!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: