Solved: CUCM Upgrade from 6.0 to 6.1(3)

jheckart · ‎03-10-2009

Hi,

I am planning an upgrade from CUCM 6.0.1.2000-3 to 6.1.3.2000-1, and nowhere is the upgrade path from 6.0 listed in the release notes.

Do I need to upgrade to 6.1.2 first, then move to 6.1.3?

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613a.html#wp396072

Thanks,

Jeff

Rob Huffman · ‎03-10-2009

Hi Jeff,

This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074

Hope this helps!

Rob

View solution in original post

Rob Huffman · ‎03-10-2009

Hi Jeff,

This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074

Hope this helps!

Rob

jheckart · ‎03-10-2009

Thanks Rob.

At least it's a quick process :)

Rob Huffman · ‎03-10-2009

Hey Jeff,

You are most welcome my friend! Not like the "old" days, I remember a 30 hour ordeal going from CCM 3.2 to 3.3 UGHHH!!

Cheers!

Rob