cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
459
Views
15
Helpful
5
Replies

DSP

ricardorojas123
Level 1
Level 1

How many DSP I need to 4 e1 (module HWIC-4T1/E1) in a 2821 Cisco Router?

5 Replies 5

The HWIC T1/E1 card is not a voice card. Thus, DSPs are not applicable.

Sorry.

-nick

I don't understand :( . Then I do not need the DSPs so that the four E1 in the Cisco 2821 work. When I need install DSP in the voice Gateway ?

Thanks

Ricardo,

The HWIC-4T1/E1 is described as a T1/E1 high speed WAN interface card (WIC). As you know, WAN interface cards are used to connect your sites to each other. This is different from VWIC or VIC cards which may be used for voice termination, for example where you have a PRI configured on the router to terminate incoming voice calls from the PSTN. You need DSPs when you are doing voice termination. Voice termination applies to a call that has two call legs, one leg on a time-division multiplexing (TDM) interface and the second leg on a VoIP connection. The TDM leg must be terminated by hardware that performs coding/decoding and packetization of the stream. This termination function is performed by the DSP resources.

You would also need DSPs on the router if you need to configure media resources such as conferencing or transcoding resources on the router.

Hope this helps.

Regards,

Michael.

Thanks mowuor, There is some Cisco book, ebook or document that explains this. For a greater understanding.

Hi Ricardo,

Here's some information that may be useful.

Cisco Voice Gateways and Gatekeepers book:

http://my.safaribooksonline.com/158705258X/ch14

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers document on CCO

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1010335

Media Resources Chapter on the CUCM SRND has some good information:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/media.html

I hope these help.

Regards,

Michael

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: