Trunk h.323 between CUCM and Nortel Meridian

Unanswered Question
Mar 11th, 2009
User Badges:

Hi, anyone has experience about connection of a CallManager ver.6.x or 7.0 with a PBX Nortel Meridian Option 11c via H.323 trunk?

There are issues on Nortel about sw version, license or hardware ?

There are documents relating to this solution?

Thanks, Lorenzo

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ribola Wed, 03/11/2009 - 08:40
User Badges:

Hi,

thanks for your response.

I had already seen this document, but I have not found anything about connection via trunk IP H.323. I can't connect the two system via E1 Q-SIG.

The Nortel Meridian have ITG card (for trunk with remote pbx) and Signalling Server (NTDU27DC Rel.4.5).

Lorenzo

Rob Huffman Wed, 03/11/2009 - 08:57
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Lorenzo,


Perhaps this doc may help (the basic concepts should carry over);


Nortel Communication Server 1000M Release 4.0 using H.323

Trunk to Cisco Unified CallManager Release 4.1(2)


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/445274no.pdf



Hope this helps!

Rob

albertoleo Tue, 07/21/2009 - 13:36
User Badges:

hi Rob, I'd like to connect and Nortel CS 1000 with h.323 trunk to a cisco 2800 sip gateway.


Nortel--h.323.--router/gateway--sip--AS


Thanks

Actions

This Discussion