03-11-2009 04:59 AM - edited 03-15-2019 04:45 PM
Hi, anyone has experience about connection of a CallManager ver.6.x or 7.0 with a PBX Nortel Meridian Option 11c via H.323 trunk?
There are issues on Nortel about sw version, license or hardware ?
There are documents relating to this solution?
Thanks, Lorenzo
03-11-2009 08:22 AM
03-11-2009 08:40 AM
Hi,
thanks for your response.
I had already seen this document, but I have not found anything about connection via trunk IP H.323. I can't connect the two system via E1 Q-SIG.
The Nortel Meridian have ITG card (for trunk with remote pbx) and Signalling Server (NTDU27DCÂ Rel.4.5).
Lorenzo
03-11-2009 08:57 AM
Hi Lorenzo,
Perhaps this doc may help (the basic concepts should carry over);
Nortel Communication Server 1000M Release 4.0 using H.323
Trunk to Cisco Unified CallManager Release 4.1(2)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/445274no.pdf
Hope this helps!
Rob
07-21-2009 01:36 PM
hi Rob, I'd like to connect and Nortel CS 1000 with h.323 trunk to a cisco 2800 sip gateway.
Nortel--h.323.--router/gateway--sip--AS
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: