Configurating Cisco ASA 5510 VPN

Unanswered Question
Mar 11th, 2009


I have an ASA 5510 just added to my network.

I have an internet router(connecting to the outside interface of the ASA) and the following interfaces: inside,DMZ1 and DMZ2.

I have the followings: LAN network connecting to the inside interface,server1 connecting to the DMZ1 and server2 connecting to DMZ2.

I want 2 users from the internet to connect to the 2 servers(user 1 connects only to server1,user 2 connects to server1)via VPN and I also want my LAN users to connect to server 1.

Can someone please help me with the configuration guide that will help me achieve this.

Thanks in advance.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ex_pmadayag Fri, 03/13/2009 - 04:39


You can achieve the setup thru configuring ipsec vpn client. For the users in your inside lan to access server 1 in DMZ1, you just need nat / pat and make sure to permit the traffic if you have ACLs configured. If it's possible to upload your current config with the servers' ip then I could help further with details.

sameoj1881 Fri, 03/13/2009 - 05:47

Hello Can you please help me with the links to config guides on ipsec vpn client configuration or clientless vpn configuration.



This Discussion