cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
551
Views
0
Helpful
3
Replies

Configurating Cisco ASA 5510 VPN

sameoj1881
Level 1
Level 1

Hi,

I have an ASA 5510 just added to my network.

I have an internet router(connecting to the outside interface of the ASA) and the following interfaces: inside,DMZ1 and DMZ2.

I have the followings: LAN network connecting to the inside interface,server1 connecting to the DMZ1 and server2 connecting to DMZ2.

I want 2 users from the internet to connect to the 2 servers(user 1 connects only to server1,user 2 connects to server1)via VPN and I also want my LAN users to connect to server 1.

Can someone please help me with the configuration guide that will help me achieve this.

Thanks in advance.

3 Replies 3

ex_pmadayag
Level 1
Level 1

Hi,

You can achieve the setup thru configuring ipsec vpn client. For the users in your inside lan to access server 1 in DMZ1, you just need nat / pat and make sure to permit the traffic if you have ACLs configured. If it's possible to upload your current config with the servers' ip then I could help further with details.

Hello Can you please help me with the links to config guides on ipsec vpn client configuration or clientless vpn configuration.

Thanks

Hi Oluwaseyi,

Check out these links, which will walk you through each of the different VPN configurations on the ASA:

ASA 7.2:

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ike.html

ASA 8.0:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ike.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: