cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
457
Views
0
Helpful
3
Replies

Routing lost after a few seconds...

gtsesmelis
Level 1
Level 1

Hello everybody.

The setup is the following :

2811 router with ISDN-BRI interfaces and a WIC-1T.

The WIC-1T intf connects via an RS-232 cable to an external Motorola modem.

When remote users dial-in establishing an ISDN connection everything is fine.

When calls come through analog modem connections, call gets established, and PPP negotiation completes successfully.

At that instant and for a few seconds, the (analog) user has network connectivity (at this point tried by continuous pings).

"Suddenly" replies stop!

Only after disconnecting the call and re-connecting (temporary) routing is reestablished, to get lost again in a while !!

We have tried with-and-without Group-Async (config directly to the Serial intf) but nothing changed.

Any ideas, anyone ?

The current config - for anyone interested and after many try-outs - is attached...

Thanx in advance.

George

3 Replies 3

Pravin Phadte
Level 5
Level 5

hi,

If you could provide the debug q921 and 932 it would be great.

Problems seems to be with authendiation

As i already mentioned the problem is on the analog connection and not on the isdn.

gtsesmelis
Level 1
Level 1

The problem is solved...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: