03-11-2009 07:58 AM - edited 07-03-2021 05:17 PM
Hi,
I run a large wlan. however i have a branch site that requires just 1 cisco accesspoint ( i have a spare 1240g ap )
I would like to make this a standalone AP connected to the lan which can manage client authentication and association. It will be connected to cisco poe switch and the site is run by a cisco router.
the laptops will require static addresses.
whats the easiest way to play around with an test a 1240g ap in fat mode ?
also is there any other new ap`s perhaps a 5ghz or n radio device that can be run solo ?
cheers
Phill
03-11-2009 03:53 PM
Hi Phil,
Have you tried using H-REAP?
H-REAP Modes of Operation Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml
H-Reap Design and Deployment Guide
http://www.cisco.com/en/US/products/ps6087/products_tech_note09186a0080736123.shtml
Hybrid Remote Edge Access Point (H-REAP) Basic Troubleshooting
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008081103d.shtml
Hope this helps.
03-12-2009 05:25 AM
Hi leolaohoo,
thanks for your replyi will read these documents.
cheers
Phill
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: