03-11-2009 07:58 AM - edited 03-06-2019 04:31 AM
All,
I have an ASA that is connected to my 3750 stack. I don't see any bpdu's being received on that port. Is it okay for me to enable portfast on this port? Should I enabled bpdu root guard if I do?
Thanks,
John
Solved! Go to Solution.
03-11-2009 08:02 AM
Yes you can enable portfast on the interface facing the ASA but it's always a good idea to have at least root guard enabled as the ASA does not support spanning tree.
In router mode BPDU's will not pass anyway as it's Layer 3, in transparent mode BPDU's will pass.
03-11-2009 08:02 AM
Yes you can enable portfast on the interface facing the ASA but it's always a good idea to have at least root guard enabled as the ASA does not support spanning tree.
In router mode BPDU's will not pass anyway as it's Layer 3, in transparent mode BPDU's will pass.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide