03-11-2009 09:38 AM
Hi;
System is running on LMS 3.0.1 with DFM service 3.0.4.
When we import edge switches (2960G) from DCR , there is no problem. But when we try to add Cisco 6509, in learning stage switch starts to reboot. We see switch is succesfully added in DFM.
After switch restart, in one minutes it restart again...and going on like this.
Ios version : s72033-ipservicesk9_wan-vz.122-33.SXH2a.bin
Because of this we spanned LMS port that connected to 6500 and captured traffic before reboot. We used wireshark software for capturing.
In capture file;
LMS IP : 10.50.10.21
6500 IP : 10.50.1.3
What we supposed to do solve this issue ?
Solved! Go to Solution.
03-11-2009 01:57 PM
Found the bug. It's CSCso85859. This is fixed in 12.2(33)SXH3.
03-11-2009 12:00 PM
What stack trace do you get on the switch after the crash? Please post the stack trace and the show version from this switch.
03-11-2009 01:09 PM
03-11-2009 01:11 PM
I don't see any evidence of a crash, but I haven't done any IOS modularity crash debugging. What does "show stack" indicate?
03-11-2009 01:29 PM
Unfortunately, I couldn't find "show stack" output.
Only these options;
Backbone2#show stacks ?
interrupts Show interrupt details.
processes Show Process details.
03-11-2009 01:57 PM
Found the bug. It's CSCso85859. This is fixed in 12.2(33)SXH3.
03-11-2009 02:23 PM
Thank you very much, we are going to update software immediately and inform you as soon as possible.
03-12-2009 02:52 PM
Problem is solved, thanks for everything.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: