Max count clients on AP 1130

Answered Question
Mar 11th, 2009

Wich's the max. count of clients 802.11b/g in a AP 1130

I have a Thresholds Template with a Max client of 12, witch's the max count of clients that can support it.

I have this problem too.
0 votes
Correct Answer by Leo Laohoo about 7 years 9 months ago

Define "help"? The more the number of clients associate to an AP, the slower the bandwidth through-put.

It will help you financially, but performance-wise? I don't think so.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
jeff.kish Wed, 03/11/2009 - 14:07

There's no hard number that the AP can support. Cisco recommends no more than 25 clients per AP, but the AP will associate as many clients as possible without a restriction.

arturo_triara Wed, 03/11/2009 - 15:16

I have 24 clients righ now, Does it help me if i increase the Load Thresholds, Max Clients to 24 ?

Correct Answer
Leo Laohoo Wed, 03/11/2009 - 15:39

Define "help"? The more the number of clients associate to an AP, the slower the bandwidth through-put.

It will help you financially, but performance-wise? I don't think so.

Scott Fella Wed, 03/11/2009 - 18:46

The default is 12, but the wlc will have that AP send beacons to the try to have the devices associate to another AP will less than 12 devices. If the devices do not associate with another AP, then they are allowed to associate.

Changing the threshold will only change the way you get alerts from the wlc. If users are not complaining, then 24 users on that AP is fine. What they use the wireless for will determine how many users you can have per ap. Observe the users or associate to that ap also and see for yourself if you think its slow. It all depends on what applications you are using on the wireless.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode