cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
906
Views
0
Helpful
9
Replies

Cisco 3600 router is it can support Cisco Unified Communication Manager ?

gilbertthor
Level 1
Level 1

Hi,

Cisco 3600 router is it can support Cisco Unified Communication Manager ?

I have the module which is Voice 2V, Is it can use it ?

Thks

-Gilbert

1 Accepted Solution

Accepted Solutions

Cisco Unified CME and Cisco IOS Software Version Compatibility Matrix

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

9 Replies 9

Jaime Valencia
Cisco Employee
Cisco Employee

no, CUCM is to be installed only on MCS servers, not routers

on a router you can install CUCME

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Hi,

May i know what is CUCME?

May i know what is the part model for it, so i can search for it.

Many thks

-Gilbert

Cisco Unified Communications Manager Express

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Hi Java,

Thks a lot, another help is it can send me the link for what requirement for me to set up the Cisco Voice environment. So i can get the more clearance picture on it.

Thks

-Gilbert

Cisco Unified CME and Cisco IOS Software Version Compatibility Matrix

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Hi java,

Thks,

Anyway what is the function for Voice 2V, which i have together with the 3600 router ?

if i download the cucme, then is it any extra module i need on it ?

Thks

-Gilbert

Hi Gilbert,

The voice 2V module is for plugging a telephone line into the router.

For CUCME, it is only software, and you do not need additional hardware - other than IP phones.

You should be aware that the 3600 is End of Life, so it doesn't have TAC support anymore as well.

hth,

nick

Hi,

Thks alot!

Will try it out.

-Gilbert

Hi,

If i wanna use the Cisco 3600 as the cisco unified communication manager is it i need to add in additional card, from the documentation i saw that we need the voice nm card.

Is it correct?

-Gilbert

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: